The Demon Skull hoodie sweatshirt is made of 50% cotton and 50% polyester men’s sweatshirt. It is a heavier, high-quality Gildan brand sweatshirt. The inside of this biker hoodie is soft.
This is “vest-friendly” - by this we mean that the front graphic is centered and 7 inches across so it can be seen when wearing a vest.
There are six colors used on both the front and the back of the sweatshirt: yellows, gray, blue, orange, and white.
Get a FREE Evil One® computer-cut sticker with each biker sweatshirt purchased
|Sizing - Hoodies||NOTES: These are quality Gildan brand hoodies, so they don’t’ shrink a lot. Since hoodies are meant to fit a little looser then tees, the measurements might make them sound really large, but they are about the same size as other hoodies you’ve bought or maybe just slightly larger. MEASUREMENTS (Chest, Length, Sleeve Length): M (44, 27, 34) - L (48, 28, 35) - XL (52, 29, 36) - 2XL (56, 30, 37) - 3XL (60, 31, 38) - 4XL (64, 32, 39) - 5XL (68, 33, 40) … Measurement Notes: Sleeve length is measured full from the center of the back.|
|Print Quality||We use a top-of-the-line automatic silkscreen press - a Gauntlet III that is a 16 stage 14 color press. This press gets you the highest quality graphics. Since the sweatshirts, as well as all of our shirts, are all silkscreened, there is no cracking, peeling, or lots of fading.|
|Material - Hoodies||These are 8 ounce Gildan Hoodies made of 50% cotton / 50% polyester. They are a pre-shrunk fleece knit with a double-lined hood as well as have double stitching in the shoulder, armhole, neck, wristbands, and cuffs.|
Flaming Demon Skull Engine "Ride Hard" Men's Sweatshirt
- Brand: Evil One®
- Product Code: Skull-Engine-Hoodie
- Availability: In Stock